AMSOIL Fuel Additives and Specialty Products

NEW Diesel Concentrate Plus Cold Flow Improver {DFC}
AMSOIL Diesel Concentrate Plus Cold Flow Improver is formulated with excellent detergency properties to help keep injectors, rings, piston crowns and the fuel pump lubricated. By improving injector performance, combustion becomes more efficient and less soot is generated. Diesel Concentrate Plus Cold Flow Improver cleans dirty injectors, improving fuel economy by up to five percent and restoring horsepower to like new. Acceleration is improved and with regular use, Diesel Concentrate Plus Cold Flow Improver continues to enhance performance by keeping injectors clean. The net savings on fuel expense can result in no additional cost to vehicle operation.

P.i. Performance Improver Concentrate {API}
AMSOIL P.i. improved fuel economy by reducing port fuel injector deposits, intake valve deposits and combustion chamber deposits in 100% of the vehicles tested! AMSOIL P.i. is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines.

Engine Flush {AEF}
AMSOIL Fast Acting Engine Flush is made from a carefully selected blend of solvents and special cleaning agents that dissolve and disperse harmful deposits formed in the crankcase, cylinder walls, pistons and rings of an internal combustion engine. When used as directed, it cleans and restores operating efficiency to valves, valve lifters, rocker arms, and pistons for improved horsepower, fuel economy, and performance. Use before changing oil.

Gasoline Stabilizer {AST}
It is difficult to drain all of the fuel from equipment before storage, and doing so would expose the system to other problems, including the formation of rust and corrosion on the bare metal in the tank and fuel system and the drying and cracking of gaskets and seals. Some fuels are pre-treated with oxidation inhibitors that allow them to be stored for short periods without forming excessive deposits, while other fuels have no inhibitors at all.

Series 2000 Octane Boost {AOB}
AMSOIL Series 2000 Octane Boost improves the performance of all two-cycle and four-cycle gasoline-fueled engines. Maximizes power and improves performance in all two-cycle and four-cycle gasoline engines. Increases octane number up to seven points. Reduces engine knock, improves ignition and engine response, helps fuel burn cleaner and inhibits corrosion. Recommended for off-road and racing use.

Diesel Concentrate Performance Fuel Additive {ADF}
AMSOIL Diesel Concentrate (ADF) provides maximum diesel operating efficiency. It compensates for the variances in quality of different fuels (including biodiesel) and the deficiencies of today’s Ultra Low Sulfur Diesel fuel (ULSD) for better engine operation. New engine technology, tighter tolerances and emission regulations require high-quality diesel fuel for long-term engine operability. AMSOIL Diesel Concentrate meets the low sulfur mandate. It improves diesel fuel quality to exceed today’s stringent performance requirements. AMSOIL Diesel Concentrate extends equipment life, lowers operating costs and improves diesel performance.

Diesel Cold Flow Improver {ACF}
AMSOIL Cold Flow Improver provides superior fuel flow to help prevent filter plugging in cold temperatures. It is formulated for a broad range of diesel fuels, including #1 diesel fuel, #2 diesel fuel, biodiesel and hard-to-treat ULSD fuels. AMSOIL Cold Flow Improver minimizes the need for blending standard #2 diesel fuel with lower quality #1 diesel fuel, helping maintain fuel economy and keep engines functioning normally. It is also excellent for use with home heating oil and kerosene heat systems.

Cetane Boost Diesel Fuel Additive {ACB}
AMSOIL Cetane Boost Additive improves diesel fuel quality that benefits all diesel engines, especially high performance designs. Supported by extensive testing and years of field trial use, AMSOIL Cetane Boost Additive has repeatedly demonstrated its ability to improve diesel engine performance. High performance diesel engines operate best with cetane values of 50 or higher. An ashless, alcohol-free additive that improves cetane up to seven points for increased power and performance in all diesel engines.

Power Foam Engine Cleaner & Degreaser {APF}
AMSOIL Power Foam removes gum, varnish and carbon deposits for more efficient fuel economy and improved overall engine performance. AMSOIL Power Foam cleans intake valves, intake manifolds and throttle plates to keep the combustion intake system running at peak efficiency. Effective in both two-cycle and four-cycle engines, AMSOIL Power Foam eliminates engine ping and keeps carburetors and injector systems properly tuned. AMSOIL Power Foam is safe for fuel injectors, catalytic converters and emission control devices. It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines.

Engine Fogging Oil {FOG}
Offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation offers easy and clean applications, while reaching more components and offering better distribution than straight motor oil.

 

Slip-Lock™ Differential Additive {ADA}
Formulated with advanced friction modifier. Designed to eliminate gear-housing chatter in cars, trucks and SUVs equipped with limited-slip, posi-traction and locking differentials. Formulated for use with both synthetic and petroleum gear lubricants and safely replaces manufacturer-recommended friction modifiers. NOTE: AMSOIL Synthetic Gear Lubes do not require the use of this additive. However, not all differentials respond the same and if chatter is noticed, the addition of AMSOIL Slip-Lock will eliminate it.

MP Metal Protector {AMP}
AMSOIL Metal Protector (MP) is an easy-to-use spray-on product that protects metal surfaces, displaces water and silences squeaks. MP cuts through rust and corrosion to restore free movement of “frozen” hardware parts. MPHD lubricates metal surfaces, leaving a dry waxlike film. Neither forms gum or sludge. AMSOIL MP is the product of choice for drying electrical and ignition systems and protecting electrical equipment from freshwater and saltwater damage. AMSOIL MP is also the product of choice for protecting firearms and other fine componentry. It contains no silicone. AMSOIL MP is compatible with plastic, leather, fabric, fishing line and paint.

MP Heavy Duty Metal Protector {AMH}
Easy-to-use spray-on synthetic product that protects metal surfaces, displaces water and silences squeaks. AMSOIL MPHD is the product of choice for metal surfaces that require a heavy duty lubricant or are exposed to the damaging effects of salt, moisture or chemical corrosion. It is ideal for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains, and for undercoating wheelwells and other metal surfaces exposed to water, dirt or road salt.

Silicone Spray {ALS}
Perfect for lubricating non-metallic surfaces that come into contact with metal, nylon, cardboard, fiberglass, wood or plastic surfaces. Use anywhere a light-duty or silicone lubricant is required. Special non-staining formula. USDA H-1 rated for incidental contact with food. Excellent for waterproofing leather boots, shoes, jackets, suede, etc.

Synthetic Universal Power Steering Fluid {PSF}
AMSOIL Synthetic Universal Power Steering Fluid provides excellent wear protection. Its synthetic formulation delivers better lubricity and reduced friction, resulting in cooler operating temperatures, longer component life and quieter operation. AMSOIL Power Steering Fluid is formulated with a high viscosity index. Its low pour point ensures immediate lubrication at startup and in cold temperatures, yet it resists thermal breakdown and maintains maximum protection in high temperatures.

Shock Therapy Suspension Fluid #5 Light {STL}
AMSOIL Shock Therapy Suspension Fluids are formulated with shear stable synthetic base stocks with high viscosity indices. The complete additive package reduces foaming, aeration and wear, while seal conditioners are added to keep seals soft and pliable. AMSOIL Shock Therapy Suspension Fluids have been tested and proven to be superior, balanced products recommended for a wide range of temperatures and applications. AMSOIL Shock Therapy Suspension Fluids are formulated to make suspension systems more predictable. The base stocks of AMSOIL Shock Therapy Suspension Fluids have inherently high viscosity indices that effectively maintain their viscosities, while their antifoam agents reduce aeration and foam.

Shock Therapy Suspension Fluid #10 Medium {STM}
AMSOIL Shock Therapy Suspension Fluids are formulated with shear stable synthetic base stocks with high viscosity indices. The complete additive package reduces foaming, aeration and wear, while seal conditioners are added to keep seals soft and pliable. AMSOIL Shock Therapy Suspension Fluids have been tested and proven to be superior, balanced products recommended for a wide range of temperatures and applications. AMSOIL Shock Therapy Suspension Fluids are formulated to make suspension systems more predictable. The base stocks of AMSOIL Shock Therapy Suspension Fluids have inherently high viscosity indices that effectively maintain their viscosities, while their antifoam agents reduce aeration and foam.

BriteSide® Miracle Wash Waterless Wash and Polish {AMW}
This unique dry car wash and polish delivers outstanding performance and quick, easy and economical spray application. No water required. Incredibly easy to use: simply spray on, use a clean terry cloth towel to spread Miracle Wash and wipe clean with a second terry cloth towel. It's simply the fastest way to clean your vehicle. Specially formulated surfactants lift dirt and other particles from the surface of your car and hold them in suspension. Miracle Wash then acts as a shield, protecting the surface from abrasion while you wipe the dirt clean. Repels dust and light dirt particles and protects against the sun's ultraviolet rays.

 

AMSOIL Brake Fluid

Series 500 High-Performance DOT 3 Brake Fluid {BF3}
AMSOIL now offers Series 500 High-Performance DOT 3 Brake Fluid. AMSOIL Brake Fluids provide superior high-temperature performance in auto/light truck, high-performance, racing and powersports applications. AMSOIL Series 500 High-Performance DOT 3 Brake Fluid is formulated with the best zinc-based anti-corrosion additives and pH stabilizers. It is designed for high-temperature stability, yet flows easily at low temperatures. AMSOIL Series 500 High-Performance DOT 3 Brake Fluid's superirior additive package provides good lubrication throughout the system and can raise boiling points to more than 232°C (450°F).

Series 600 DOT 4 Racing Brake Fluid {BF4}
AMSOIL now offers Series 600 DOT 4 Racing Brake Fluid. AMSOIL Brake Fluids provide superior high-temperature performance in auto/light truck, high-performance, racing and powersports applications. AMSOIL Series 600 DOT 4 Racing Brake Fluid is formulated with the best zinc-based anti-corrosion additives and pH stabilizers. It is designed for high-temperature stability, yet flows easily at low temperatures. AMSOIL Series 600 Racing Brake Fluid's superior additive package provides good lubrication throughout the system and can raise boiling points to more than 232°C (450°F). It keeps water in suspension, slowing its effects on the brake system.